Pool Patch

3 most common pebble surfaces

(See all Pool Patch Pool Pebble Repair Kit colors below)
1-800-588-4008

Pool Pebble Repair Kit

Pool Patch™ Pool Pebble Repair Kit is composed of our pozzolan blended cement, premium natural aggregates, along with the finest mineral based pigments and our acrylic-polymer latex admixture to produce a quality polymer-modified pool pebble plaster patch. Perfect for pebble rolled bond beam repairs, surface cracks, delamination and rebar patches.

Pool Pebble Repair Kit is available in these sizes:

Bond Beam Trowel

A shape trowel is used to help form step tread edges and rolled bond beams,
some of the most common pool pebble issues are in these areas.

Do It Yourself Pebble Tech Pool Plaster Mix

Pool Patch Instructions

Download Pool Pebble Repair Kit Instructions
  1. Lower water below repair area.
  2. Remove loose cement and chip area down a minimum of a ¼ inch deep.
  3. Add 2 oz. of LIQUID CEMENT BONDER per 1½ lb. of DRY POOL PATCH CEMENT MIX.
  4. Add water and mix until a putty consistency is achieved.
  5. Trowel POOL PATCH firmly filling the area. Trowel till POOL PATCH is smooth and flat. Remove excess from edges with a moist sponge. After POOL PATCH starts to cure, spray with water using a spray bottle to expose the pebble. If POOL PATCH has a film after cure time, it can be removed by wetting the surface area with water and pouring a mixture of 1 part muriatic acid to 3 parts water on the patched area. Allow mixture to expose area 1 minute and rinse off using a water hose.
  6. Allow to cure 12 hours before filling pool.