1-800-588-4008

Pool Patch

Liquid Cement Bonder included!
Do It Yourself Pool Plaster Repair Kit

White Pool Plaster Repair Kit

Pool Patch™ White Pool Plaster Repair Kit is composed of our pozzolan blended white cement and our acrylic-polymer latex admixture to produce a quality polymer-modified pool plaster patch.

White Pool Plaster Repair Kit is available in these sizes:

Pool Plaster Instructions

Download Pool Plaster Repair Kit Instructions
  1. Lower water below repair area.
  2. Remove loose cement and chip area down a minimum of a ¼ inch deep.
  3. Add 2 oz. of LIQUID CEMENT BONDER per 1½ lb. of DRY POOL PATCH CEMENT MIX.
  4. Add water and mix until a putty consistency is achieved.
  5. CRACK REPAIRS - Apply POOL PATCH into crack and wipe off excess material with a moist sponge.
  6. CHIPS & LARGER AREAS -Trowel POOL PATCH firmly filling the area. Trowel till patch is smooth and flat. Remove excess from edges with a moist sponge. After POOL PATCH stiffens, trowel again with a moist trowel until area is flat and smooth.
  7. Allow to cure 12 hours before filling pool.

Bond Beam Trowel

A shape trowel is used to help form step tread edges and rolled bond beams,
some of the most common pool pebble issues are in these areas.